•  Plate Shaped O1 Tool Steel HRC63 Hardness High Wear Resistance SKS3 / 9CrWMn Manufactures
    SKS3 / O1 / 1.2510 High Wear Resistance Steel Plate of Cold Work Tool Steel Equivalent grades GB DIN AISI JIS 9CrWMn 1.2510 O1 SKS3 Chemical Composition (%) Grade C Si Mn P S Cr W V 9CrWMn 0.85-0.95 ≤0.40 0.90-1.20 ≤0.030 ≤0.030 0.50-0.80 0.50-0.80 - O1 0.85-1.00 0.10-0.50 1.00-1.40 ≤0.030 ≤0.035 0.40-0.60 0.40-0.60 ≤0.30 1.251 0.90-1.05 0.15-0.35 1.00-1.20 ≤0.030 ≤0.030 0.50-0.70 0.60-0.70 0.05-0.15 SKS3 0.85-1.00 ≤0.40 1.00-1.40 ≤0.030 ≤0.030 0.40-0.70 0.40-0.60 ≤0.40 1. Features (1) With ... more
    Brand Name:CF
    Model Number:SKS3, O1, 1.2510, 9CrWMn
    Place of Origin:CHINA

    Plate Shaped O1 Tool Steel HRC63 Hardness High Wear Resistance SKS3 / 9CrWMn

  •  Micro Deformation O1 Tool Steel Round Bar Annealed Heated 1.2510 / SKS3 Manufactures
    ...Micro-deformation of Wear-resistant Tool Steel Bar 1.2510 / SKS3 / O1 1. Availability and hardness Soft annealed, hardness ≤ 230HBS. 2. Typical chemical composition (mass fraction,%) C Si Mn Cr W P S V 0.... more
    Brand Name:CF
    Model Number:1.2510 / SKS3 / O1
    Place of Origin:China

    Micro Deformation O1 Tool Steel Round Bar Annealed Heated 1.2510 / SKS3

  •  O1 / BO1 Tool Steel Metal Round Bar , Hot Rolled Steel Round Bar Small MOQ Manufactures
    ...O1/BO1 Tool Steel , Small MOQ Introduction O1 tool steel is a low alloy cold work tool steel that must be oil-quenched in heat treatment. O1 contains small amounts of manganese, tungsten, and chromium, giving O1 adequate toughness for normal tool... more
    Brand Name:UST
    Model Number:DIA16-800MM
    Place of Origin:CHINA

    O1 / BO1 Tool Steel Metal Round Bar , Hot Rolled Steel Round Bar Small MOQ

  •  Hot Rolled DIN 1.2510 , AISI O1 Cold Work Tool Steel Flat Bar Manufactures
    ...Hot Rolled DIN 1.2510 , AISI O1 Cold Work Tool Steel Plate Description: DIN 1.2510, AISI O1, JIS SKS3, GB9CrWMn cold work tool steel Hot rolled or forged condition, annealing , black or milled surface Hardness: ≤210HBS Hot... more
    Brand Name:ChangGang,TaiGang,BaoGang,Fushui,TianGong Steel
    Model Number:DIN 1.2510, AISI O1, JIS SKS3, GB9CrWMn
    Place of Origin:China

    Hot Rolled DIN 1.2510 , AISI O1 Cold Work Tool Steel Flat Bar

    DongGuan RuiYuan Steel Co.Ltd
    [Guangdong,China]
  •  special steel flat 1.2510/O1 tool steel Manufactures
    ... 9001 certificated 3.Higher resistance to heat checking 4.Factory direct sales&steady supply Detailed Description steel grade: Din 1.2510/ O1 specification: Round bars 60-800mm flats 40-350x100-1000mm Length: 2-5.7m Delivery condition... more
    Brand Name:rising
    Model Number:1.2510/O1
    Place of Origin:china

    special steel flat 1.2510/O1 tool steel

  •  1.2510 Mould Steel Flat Bar,AISI O1 Tool Steel Manufactures
    ... steel bar 25-400mm*100-610mm Surface Condition Black surface/ Grinded/ Machined Hardness Annealed HBS 225 max Characteristics Tool Steel 1.2510 Round Bar is American standard non-deforming oil steel, the best oil-hardened tool steel. O1 more
    Brand Name:JINGCHENG
    Model Number:DIN 1.2510 ;AISI O1
    Place of Origin:China

    1.2510 Mould Steel Flat Bar,AISI O1 Tool Steel

  •  Grinding Hot Forged NF 90MCW5 9CrWMn High Speed Tool Steels ASTM DIN JIS , HB210 Max Hardness Manufactures
    ...Grinding Hot Forged NF 90MCW5 9CrWMn High Speed Tool Steels ASTM DIN JIS , HB210 Max Hardness Descrition: Properties: High hardness and good wear resistance. Good ... more
    Brand Name:YOUERTE
    Model Number:ASTM 01,DIN 1.2510
    Place of Origin:Wuxi

    Grinding Hot Forged NF 90MCW5 9CrWMn High Speed Tool Steels ASTM DIN JIS , HB210 Max Hardness

    Youerte Material CO.,LTD.
    [Jiangsu,China]
  •  Peeled / Turned Oil Hardening Tool Steel / Special Steel ASTM A681 AISI O1 Manufactures
    ...ASTM A681 AISI O1 Round Bars , Cold Work Tool Steel , Oil Hardening Tool Steel , Special Steel -- 50,000 tons Stock -- 7 warehouses and branches -- 47 sets of vertical band saw -- 100 sets ... more
    Brand Name:Ningshing
    Model Number:O1
    Place of Origin:China

    Peeled / Turned Oil Hardening Tool Steel / Special Steel ASTM A681 AISI O1

  •  DIN 1.2510 / AISI O1 /SKS3 Cold Work Tool Steel, 1.2510/O1/SKS3 tool steel round bars, 1.2510/O1/SKS3 steel plates Manufactures
    ... 810mm CONTACT US to get the best offer! sales(at)altaspecialsteel.com DIN 1.2510 / AISI O1 Tool Steel, 1.2510 tool steel, O1 tool steel, 1.2510 ESR steel, O1 ESR steel, 1.2379, O1 flat bar 1.2510, O1 steel plate, 1.2510, O1 square bar,1.2510/O1 tool more
    Brand Name:ALTA
    Model Number:DIN 1.2510 / AISI O1 /SKS3 Cold Work Tool Steel, 1.2510/O1/SKS3 tool steel round bars, 1.2510/O1/SKS3 steel plates
    Place of Origin:China

    DIN 1.2510 / AISI O1 /SKS3 Cold Work Tool Steel, 1.2510/O1/SKS3 tool steel round bars, 1.2510/O1/SKS3 steel plates

  •  O1/1.2510/SKS3 tool steel, O1/1.2510/SKS3 steel rounds, O1/1.2510/SKS3 flat bars, O1/1.2510/SKS3 steel plates, EAF, ESR Manufactures
    ...ALTA SPECIAL STEEL supply DIN 1.2510 / AISI O1 /SKS3 COLD WORK TOOL STEEL in round bar, plate, square, sheet and block. Product Range: Round bars : Dia 8mm - 450mm ... more
    Brand Name:ALTA SPECIAL STEEL
    Model Number:O1/1.2510/SKS3 tool steel
    Place of Origin:China

    O1/1.2510/SKS3 tool steel, O1/1.2510/SKS3 steel rounds, O1/1.2510/SKS3 flat bars, O1/1.2510/SKS3 steel plates, EAF, ESR

  •  High Wear Resistance Hot rolled Cold Work Tool Steel DIN 1.2510 Manufactures
    ...High Wear Resistance Hot rolled Cold Work Tool Steel DIN 1.2510 Description: 1.DIN 1.2510, AISI O1, JIS SKS3, GB9CrWMn cold work tool steel 2.Hot rolled or forged condition, annealing , black or milled surface 3.Hardness: ≤210HBS... more
    Brand Name:ChangGang,TaiGang,BaoGang,Fushui,TianGong Steel
    Model Number:DIN 1.2510, AISI O1, JIS SKS3, GB9CrWMn
    Place of Origin:China

    High Wear Resistance Hot rolled Cold Work Tool Steel DIN 1.2510

    DongGuan RuiYuan Steel Co.Ltd
    [Guangdong,China]
  •  Tool steel NAK80/HPM50 Manufactures
    ...Chinese Changxiang special steel manufacturer,isspecialized in special forged steel Tool steel & mould steel & alloy steel Round bar steel ,dia 50 mm -- 1000 mmSquare steel, 70 mm -- 1000 mm Flat steel /module, thickness 80 mm --800 mm ,width 300... more
    Brand Name:changxiang
    Model Number:Tool steel NAK80/HPM50
    Place of Origin:China

    Tool steel NAK80/HPM50

  •  tool steels/A2/A8MOD-1.2363/DC-53 Manufactures
    A2 recognized for its high toughness and resistance against wearand hardness and fine robustness .the spheroical annealed process make it easy process by shearing and cutting as well as its stability after tempering. Applied in complex and precise moulds ... more
    Brand Name:Fangyuan special
    Model Number:tool steels/A2/A8MOD-1.2363/DC-53
    Place of Origin:china

    tool steels/A2/A8MOD-1.2363/DC-53

  •  Tool steel bar 1.2379 factory supply Manufactures
    ...Tool steel bar 1.2379 factory supply Dongguan songshun mould steel CO.,LTD. as China's largest steel wholesaler, Main Steel has: 4140 steel,D2 steel,4130 steel,H13 steel,P20 steel,AISI 4340 steel,1.2738 steel,1.2379 steel,1.2344 steel,1.2080 steel etc.. If... more
    Brand Name:songshun
    Model Number:D2/1.2379/SKD10/Cr12Mo1V1
    Place of Origin:China

    Tool steel bar 1.2379 factory supply

  •  O1 special tool steel Manufactures
    ...O1 Special Tool Steel 1. Chemical composition: C=0.85~0.95, Si=0.20~0.40, Mn=1.00~1.30, Cr=0.40~0.60, W=0.40~0.60, V=0.... more
    Brand Name:YAGANG
    Model Number:O1
    Place of Origin:China

    O1 special tool steel

  •  1.2510 Tool Steel Manufactures
    ...O1/1.2510 tool steel is a general purpose oil-hardening tool and die steel. Normal care in heat treatment gives good results in hardening and produces small dimensional changes. O1 has good abrasion resistance and sufficient toughness... more
    Brand Name:HSBIT
    Minimum Order Quantity:3 Tons
    Price:USD1400/ T

    1.2510 Tool Steel

  •  AISI O1, Sk53, DIN 1.2510 Cold Work Tool Steel Manufactures
    ...Grade: AISI O1, SK53, DIN 1.2510 cold work tool steel 2. Smelting Tech: EAF+LF+VD 3. Delivery condition: Forged, Annealed, UT test 4. Size range: Dia 20mm--... more
    Place of Origin:china
    Steel:Tool Steel Round Bars
    Material:Alloy Steel

    AISI O1, Sk53, DIN 1.2510 Cold Work Tool Steel

  •  O1 Tool Steel Manufactures
    ...O1 Tool Steel is the original oil-hardening, non-shrinking” tool steel that can be hardened to the Rockwell C 65 range from a low austenitizing temperature. O1 is a general-purpose tool steel that is typically used in applications where... more
    Categories:Hot Work Tool Steel
    Country/Region:china

    O1 Tool Steel

  •  AISI O1 Tool Steel Manufactures
    OTAI SPECIAL STEEL is O1 steel stockholders and suppliers from china. more 16 years experience in AISI O1 tool steel round bar, flat bar and plate supply. more
    Categories:Tool Steel Bar
    Telephone:0086-769-33232622
    Country/Region:china

    AISI O1 Tool Steel

  •  O1 / Din1.2510 Cold Work Tool Steel Manufactures
    ...Specifications Cold Work Tool Steel 1.2510 1.Die Steel O1, 1.2510, SKS3, 2.EAF+LF+VD+ESR 3.Excellent quenching appear Cold work die steel DIN1.2510, AISI O1, SKS3 1.1.2510 Typical Chemical composition: (%) C:0.90 Si:0.30 Mn:1.20... more
    Brand Name:Circle Four
    Model Number:DIN 1.2510/ AISI O1/ JIS SKS3
    Place of Origin:China

    O1 / Din1.2510 Cold Work Tool Steel

  •  tool steel die steel O1/1.2581 round bar forged bar rolled bar flat bar plate Manufactures
    High quality tool steel / die steel / alloy steel round bars, flat bars, plate, sheets. DIN/AISI/ASTM/JIS Standard. Welcome to inquiry. more
    Model Number:FD-C3
    Place of Origin:Huangshi, China

    tool steel die steel O1/1.2581 round bar forged bar rolled bar flat bar plate

Tell “o1 tool steel” Suppliers Your Requirement
*E-mail:
* Message:
Characters Remaining: (0/3000)
Inquiry Cart 0